My image

The Naxos stone

My image

This stone, which is composed of pressed corundum ,emery, magnesite and magnesium, has a coarse grinding surface which does not have to be resharpened.

Because of this stone's particular qualities, a somewhat grainier whole-meal flour is produced when large amounts are milled, and the bran is of the same size as the rest of the flour. Sharpens naturally!

Stone Mills

My image My image My image



Mill output approx.
g/h (fine)

Dimensions in cm
(Height/Width/Depth)

Weight approx. kg

Stone Diameter

Motor

Funnel Volume approx.
g

Rpm

Sort of Woods

Applicable

Rondella

4-6 kg/h


36/20/20


9kg

90mm

0.36kW, 220V/50Hz

600g


1100

cembra pine/wood/alder wood

family 1-4 persons

Piccolina

4-6 kg/h


36/20/20


9kg

90mm

0.36kW, 220V/50Hz

600g


1100

cembra pine wood

family 1-4 persons

A100

5-7 kg/h


38/23/23


9kg

100mm

0.36kW, 220V/50Hz

1000g


1100

cembra pine wood

extended family, cookery course, large
kitchen/hotels, agriculture

A130

7-19 kg/h


45/23/23


12kg

130mm

0.57kW, 220V/50Hz

1500g


1100

cembra pine wood

Stepless adjustment of the fineness of milling, outer wooden surface treated with natural resinous varnish, inner surface treated with fireproof varnish, hopper for 2 pounds (3 pounds for A130), milling stones self sharpened.

My image

Models A500/A400

Both models are available with Naxos stone. These mills have a transmission to the slow rotation - i.e. cold milling. They have stepless adjustment of the fineness of milling, outer wooden surface treated with natural resinous varnish, inner surface treated with fireproof varnish, milling stones self sharpened.

Especially suited for small bakeries, schools, hotels, agricultural operations, etc.

Hourly capacity:

Model A500 (NA): approx. 50 to 70 kg of grain. Middle sized mill. Hopper holds 29kgs, amount of grain from hopper is smoothly adjustable.

Model A400 (NA): approx. 25 to 30 kg of grain. Smaller mill. Hopper holds 11kgs.

My image

Models A300/A200

The models A300 and A200 are true to the tradition of the household mill. The slow grinding speed (gear-driven) means that the grain is warmed only to a very slight degree, even after hours of milling. This means really cold milling. They have stepless adjustment of the fineness of milling, outer wooden surface treated with natural resinous varnish, inner surface treated with fireproof varnish, milling stones self sharpened. Therefore, these models are quite good for relatively large quantities produced in constant operation. The A300 and A200 are available with Naxos stone, or the newly developed stone mixture by request.

We recommend them for households, farms, schools, agricultural operations, hotels, etc.

Hourly capacity:

Model A300 (NA): approx. 15 to 20 kg of grain. Hopper holds 5 kgs.

Model A200 (NA): approx. 8-12 kg of grain. Hopper holds 1 kg.

My image

Models A1000/A700

With these two models, Naxos stone is used for the millstone.

These are middle sized classical stone mills, with a transmission to the slow rotation - i.e. cold milling. They have stepless adjustment of the fineness of milling, outer wooden surface treated with natural resinous varnish, inner surface treated with fireproof varnish, hopper holds 60 kgs (A700), 100 kgs (A1000), milling stones self sharpened and the amount of grain from hopper is smoothly adjustable.

We recommend these models for large kitchens, small bakeries, farms, etc.

Hourly capacity:

Model A1000 (NA): approx. 100 to 140 kg of grain.

Model A700 (NA): approx. 70 to 100 kg of grain.

My image

Model A1600

With a Naxos millstone; especially suitable for grinding large quantities, e.g. for industrial purposes.

Hourly capacity: approx. 450 to 500 kg of grain.

This is the biggest size classical stone mill with a transmission to the slow rotation - i.e. cold milling. It has stepless adjustment of the fineness of milling, outer wooden surface treated with natural resinous varnish, inner surface treated with fireproof varnish. Hopper holds 180 kgs and amount of grain from hopper is smoothly adjustable. Milling stones are self sharpening.

Model A1200

Also equipped with a Naxos millstone; smaller capacity due to stone's small diameter.

Hourly capacity: approx. 140 to 180 kg of grain (when in constant operation, the capacity can be increased by approx 30% with the aid of pneumatic transport system. Hopper holds 100 kgs and is similar to the A1600.

SIFTING MACHINES

My image

Model 3 K

Three chambers, four discharges (one for bran), suited to A1000, A700 and A500 mills. A set of replacement sieves is available. The sieves can be changed according to the actual need. They are laid from the most dense mesh to the least dense mesh at the end before the bran is falling out. Fastening straps for sacks are included.

Sifting machines are also available with five or six chambers upon request.

My image

Model 3 KKA

Smaller model, three chambers, four discharges (one for bran), suited to A400, A300 and A200 mills. A set of replacement sieves is available. The sieves can be changed according to the actual need. They are laid from the most dense mesh to the least dense mesh at the end before the bran is falling out. Fastening straps for sacks are included.

Our sifting machines are made of solid pine and are driven by their own electrical motors. They can easily be combined with the corresponding mills (even if they have been purchased earlier).

The grain is separated into different degrees of fineness for various flours and meals and the bran is sifted out simultaneously, all in one step.

MILLS WITH INTEGRATED SIEVES

My image

Model A500 MSM

Millstone:Naxos stone (NA). The degree of fineness is infinitely adjustable from the exterior by means of a hand-wheel. This is perfectly versatile and would suit even the most demanding customer.

Hourly capacity: Approx. 50 to 70 kg of grain with NA

Motor: 4.25 kW/380V/50Hz with overload protection

Stone Diameter: 500 mm

Main usage: large farmers, large lodgings, medium bakeries.

My image

Model A400 MSM/A300 MSM

Construction same as A500 MSM with millstone of Naxos stone (NA) . The degree of fineness is infinitely adjustable from the exterior by means of a hand-wheel.

Main usage: farmers family grinder, large cafeterias, large lodgings, small bakeries

A400 MSM: 1.75kW, 380 V/50Hz electrical motor

Hourly capacity: approx. 27 to 32 kg with NA

A300 MSM: 1.0 kW, 220 V/50 Hz electrical motor

Hourly capacity: approx. 15 to 22 kg with NA

The newest development is an efficient, practical flour mill with an integrated sifting machine which we call the 'combo mill'.

As the name says, it consists of a combined mill and sifting machine.

This combination makes it possible to produce both whole-grain flour and meal AND plain flour and meal with one machine.

The grain is ground in the mill and then sifted in the attached sifting machine. In one grinding step, fine flour, fine meal, coarse meal and bran are produced.

Exchanging the sieves makes it possible to precisely determine the fineness of the flour and meal.

The combo mill is made of solid pine. Thanks to its simple construction, exchanging the sieves and cleaning the mill are as easy as can be.